How to protect your wire splice point? Pre-cut customized sizes and length heat shrink may bring you more solutions.
How to protect your wire splice point? Pre-cut customized sizes and length heat shrink may bring you more solutions.
| Introduction | ||||
| Semi-rigid polyolefin dual wall heat-shrinkable tube, high shrinkage rate, flame retardant.Suitable for waterproof sealing and insulation protection of automobile wiring harness wire connectors, terminals and components. Length can be customized. | ||||
| Features |
| Operating temperature: -40°C to 130°C |
| Minimum full recovery temperature: 135°C |
| Environmentally friendly, RoHS & ELV compliant |
| Shrink ratio: 4:1 |
| Standard color: Black |
| Technical Data | ||||
| Property | Test Method | Requirement | ||
| Material Properties | ||||
| Longitudinal change | ASTM D2671 | ≥-10% | ||
| Tensile strength | ASTM D2671 | ≥10.3MPa | ||
| Ultimate elongation | ASTM D2671 | ≥250% | ||
| Secant modulus 2% (Outer layer / recovered) | ASTM D2671 | ≥137MPa | ||
| Heat shock (225°C/4hrs) | ASTM D2671 | No cracking, dripping or flowing of outer jacket | ||
| Dynamic cut through | ASTM D3032 | ≥13.6kg | ||
| Volume resistivity | ASTM D2671 | ≥1.0×1014Ω·cm | ||
| Flammability (outer layer) | ISO 6722-1 | Self-extinguishing within 30S | ||
| Splice performance | ||||
| Current leakage | Q/DLH 0006 | ≤0.25μA | ||
| Room temperature flex test Current leakage |
Q/DLH 0006 |
≤0.25μA |
||
| Thermal shock Current leakage |
Q/DLH 0006 |
≤0.25μA |
||
| Low temperature flexibility dielectric withstand 1 minute at 1,000 volts |
Q/DLH 0006 |
No breakdown |
||
| Heat aging Current leakage |
Q/DLH 0006 |
≤0.25μA |
||
| Fluid immersion Current leakage Swell |
Q/DLH 0006 |
≤0.25μA ≤50% |
||
| Dimension | ||||
| Size | As Supplied (mm) | After recovered (mm) | ||
| A1 | Inner diameter D (min.) |
Inner diameter d (max.) |
Wall thickness t (nom.) |
Adhesive Wall thickness t1 (nom.) |
| 4.0 | 4.0 | 1.00 | 1.00 | 0.50 |
| 5.75 | 5.75 | 1.25 | 1.20 | 0.60 |
| 7.5 | 7.5 | 1.65 | 1.60 | 0.80 |
| 9.0 | 9.0 | 2.30 | 1.80 | 0.90 |
| 11.0 | 11.0 | 2.40 | 2.00 | 1.00 |
| 12.7 | 12.7 | 2.80 | 2.10 | 1.10 |
| 14.0 | 14.0 | 3.00 | 2.20 | 1.20 |
| 18.3 | 18.3 | 4.45 | 2.40 | 1.40 |
How to Contact us?
Email: Enquiry@upolymer.com Whatsapp:8615940969469