Hot Melt Adhesive Tubing, along with heat shrink tubing to increase the amount of glue
More Glue. Stronger Seal. Seal It. Protect It. This is NOT heat shrink tubing, but hot melt adhesive tubing, along with heat shrink tubing to increase the amount of glue, providing waterproof sealing for wire harness wire joints and termination points. #wireharness #glue #adhesive #heatshrink #wiresplice #wireterminal #hotmelt
| Features |
| Operating temperature: -40°C to 125°C |
| Halogen-free and environmental friendly, RoHS & ELV compliant |
| Standard Color: Grayish Yellow |
| Technical Data | ||||
| Property | Test Method | Requirement | ||
| Specific gravity | ASTM D792 | 0.95±0.05 g/cm³ | ||
| Softening point | ASTM E28 | 130°C±10°C | ||
| Low temperature impact | ASTM D746 | ≤ -20°C | ||
| Water absorption (23°C/24h) | ASTM D570 | ≤1.0% | ||
| Volume resistivity | ASTM D257 | ≥1.0×1010Ω.cm | ||
| Dielectric strength | ASTM D149 | ≥500V | ||
| Stored temperature | / | ≤45°C | ||
| Dimension | ||||
| Size | Inner diameter (mm) A |
Length (mm) B(±1) |
Wall thickness (mm) C |
Opening Slit (mm) S (nom.) |
| A1-5-2.3-10 | 2.3±0.2 | 10 | 0.60±0.10 | / |
| A1-5-2.3-19 | 2.3±0.2 | 19 | 0.60±0.10 | / |
| A1-5-2.3-25 | 2.3±0.2 | 25 | 0.60±0.10 | / |
| A1-5-2.9-19 | 3.1±0.2 | 19 | 0.80±0.10 | / |
| A1-5-2.9-25 | 3.1±0.2 | 25 | 0.80±0.10 | / |
| A1-5-4.0-19 | 4.0±0.2 | 19 | 0.80±0.10 | / |
| A1-5-4.0-25 | 4.0±0.2 | 25 | 0.80±0.10 | / |
| A1-5-5.0-19 | 5.0±0.2 | 19 | 0.90±0.12 | / |
| A1-5-5.0-25 | 5.0±0.2 | 25 | 0.90±0.12 | / |
| A1-5-U5-5 | 2.7±0.2 | 5 | 1.40±0.15 | 1.2 |
| A1-5-U7-5 | 3.5±0.2 | 5 | 0.90±0.15 | 1.4 |
| Cross Reference |
| Tyco-Raychem: SAS/ SASR/ TSAS |
How to Contact us?
Email: Enquiry@upolymer.com Whatsapp:8615940969469