Sold out
S2 Flexible Polyolefin Thin Wall Heat Shrink Tube
$0.00
S2 Flexible Polyolefin Thin Wall Heat Shrink Tube Introduction A thin wall, flexible, environmental friendly, flame-retardant polyolefin heat shrinkable...
S2 Flexible Polyolefin Thin Wall Heat Shrink Tube
Introduction
A thin wall, flexible, environmental friendly, flame-retardant polyolefin heat shrinkable tube.Suitable for insulation protection, parts identification, mechanical protection, bundling of wires, wire harnesses, and electronic components.
Features
Operating temperature: -40 to 125°C
Minimum full recovery temperature: 125°C
Shrink ratio: 2:1 & 3:1
Environmental friendly, RoHS & ELV compliant
Standard Color: See the below for details
UL224 E341796
Dimension
| Part No. | As supplied(mm) | After recovered(mm) | Standard Length | ||
| S2 | ID | ID(Max.) | WT | m/roll | |
| Shrink Ratio 2:1 | |||||
| 0.6 | 0.9±0.2 | 0.4 | 0.28±0.10 | 200 | |
| 0.8 | 1.1±0.2 | 0.5 | 0.28±0.10 | 200 | |
| 1.0 | 1.6±0.3 | 0.65 | 0.35±0.10 | 200 | |
| 1.5 | 2.1±0.3 | 0.85 | 0.35±0.10 | 200 | |
| 2.0 | 2.6±0.4 | 1.0 | 0.40±0.10 | 200 | |
| 2.5 | 3.1±0.4 | 1.3 | 0.40±0.10 | 200 | |
| 3.0 | 3.6±0.4 | 1.5 | 0.45±0.10 | 200 | |
| 3.5 | 4.1±0.4 | 1.8 | 0.45±0.12 | 200 | |
| 4.0 | 4.6±0.4 | 2.0 | 0.48±0.12 | 200 | |
| 4.5 | 5.1±0.5 | 2.3 | 0.50±0.12 | 100 | |
| 5.0 | 5.6±0.5 | 2.5 | 0.52±0.12 | 100 | |
| 5.5 | 6.1±0.5 | 2.8 | 0.52±0.12 | 100 | |
| 6 | 6.8±0.5 | 3.0 | 0.55±0.12 | 100 | |
| 7 | 7.8±0.5 | 3.5 | 0.55±0.12 | 100 | |
| 8 | 8.8±0.5 | 4.0 | 0.60±0.12 | 100 | |
| 9 | 9.8±0.5 | 4.5 | 0.60±0.12 | 100 | |
| 10 | 10.8±0.5 | 5.0 | 0.60±0.12 | 100 | |
| 11 | 11.8±0.5 | 5.5 | 0.60±0.12 | 100 | |
| 12 | 12.8±0.5 | 6.0 | 0.60±0.12 | 100 | |
| 13 | 13.8±0.5 | 6.5 | 0.70±0.12 | 100 | |
| 14 | 14.9±0.5 | 7.0 | 0.70±0.12 | 100 | |
| 15 | 16.0±0.5 | 7.5 | 0.70±0.12 | 100 | |
| 16 | 17.0±0.5 | 8.0 | 0.75±0.15 | 100 | |
| 17 | 18.2±0.7 | 8.5 | 0.75±0.15 | 100 | |
| 18 | 20.0±0.8 | 9.0 | 0.75±0.15 | 100 | |
| 20 | 22.0±1.0 | 10.0 | 0.85±0.15 | 100 | |
| 22 | 23.5±1.0 | 11.0 | 0.85±0.15 | 100 | |
| 25 | 26.5±1.0 | 12.5 | 0.95±0.18 | 50 | |
| 28 | 29.0±1.0 | 14.0 | 0.95±0.18 | 50 | |
| 30 | 32.0±1.5 | 15.0 | 1.00±0.20 | 50 | |
| 35 | 37.0±1.5 | 17.5 | 1.00±0.20 | 50 | |
| 40 | 42.0±2.0 | 20.0 | 1.05±0.20 | 50 | |
| 45 | 47.0±2.0 | 22.5 | 1.05±0.20 | 25 | |
| 50 | ≥50 | 25 | 1.05±0.20 | 25 | |
| 60 | ≥60 | 30 | 1.10±0.20 | 25 | |
| 70 | ≥70 | 35 | 1.20±0.20 | 25 | |
| 80 | ≥80 | 40 | 1.30±0.20 | 25 | |
| 90 | ≥90 | 45 | 1.30±0.20 | 25 | |
| 100 | ≥100 | 50 | 1.30±0.30 | 25 | |
| 120 | ≥120 | 60 | 1.40±0.30 | 25 | |
| 150 | ≥150 | 75 | 1.40±0.30 | 25 | |
| 180 | ≥180 | 90 | 1.60±0.30 | 25 | |
| Part No. As supplied(mm) | After recove | red(mm) | Standard Length | |
| S2 ID | ID(Max.) | WT | m/roll | |
| Shrink Ratio 3:1 | ||||
| 1.5/0.5 2.2±0.4 | 0.5 | 0.45±0.12 | 200 | |
| 3/1 3.8±0.4 | 1.0 | 0.55±0.12 | 200 | |
| 4.5/1.5 5.2±0.5 | 1.5 | 0.60±0.12 | 100 | |
| 6/2 6.6±0.5 | 2.0 | 0.65±0.12 | 100 | |
| 9/3 9.7±0.5 | 3.0 | 0.80±0.15 | 50 | |
| 12/4 13.2±0.8 | 4.0 | 0.85±0.15 | 50 | |
| 15/5 16.0±0.8 | 5.0 | 0.90±0.15 | 50 | |
| 18/6 19.5±0.8 | 6.0 | 1.00±0.20 | 50 | |
| 24/8 26.5±1.0 | 8.0 | 1.20±0.20 | 25 | |
| 30/10 32.0±1.5 | 10.0 | 1.20±0.20 | 25 | |
| 39/13 41.0±1.5 | 13.0 | 1.50±0.30 | 25 | |
| 51/17 ≥51 | 17 | 1.65±0.30 | 20 | |
| 60/20 ≥60 | 20 | 1.75±0.30 | 20 | |
| 70/23 ≥70 | 23 | 1.75±0.30 | 20 | |
| 80/26 ≥80 | 26 | 1.85±0.30 | 20 | |
| 90/30 ≥90 | 30 | 2.15±0.30 | 20 | |
| 100/33 ≥100 | 33 | 2.35±0.30 | 20 | |
Technical Data
| Property | Test Method | Requirement | |
| Tensile Strength | ASTM D2671 | ≥10.4MPa | |
| Ultimate Elonation | ASTM D2671 | ≥200% | |
| 2%Secant modulus | ASTM D2671 | ≤172MPa | |
| Heat Aging(158℃/168h) | ASTM D2671 | ||
| Tensile Strength | ≥7.3MPa | ||
| Ultimate Elongation | ≥100% | ||
| Water absorption(23℃/24h) | ASTM D2671 | ≤0.5% | |
| Low-temperature flexibility(-40°℃/4h) | ASTM D2671 | No cracking | |
| Heat shock(250°℃/4h) | ASTM D2671 | No cracking,dripping or flowing | |
| Dielectric breakdown | ASTM D2671 | ≥AC 2500V | |
| Power frequency withstand voltage | AC2500V,1min | ≥60s | |
| Volume resistivity | ASTM D2671 | ≥1.0×10¹⁴Ω.cm | |
| Flammability (colors only) | UL224 | VW-1 | |
| Copper corrosion(158°℃/16h) | ASTM D2671 | No corrosion | |
