Sold out
C101 Non-tracking Heat Shrink Tube
C101
$0.00
C101 Non-tracking Heat Shrink Tube Introduction Cross-linked polyolefin,with or without adhesive liner.Excellent resistance to electrical tracking and creeping corrosion.Suitable for insulation protection of indoor and outdoor power cable...
C101 Non-tracking Heat Shrink Tube
Introduction
Cross-linked polyolefin,with or without adhesive liner.Excellent resistance to electrical tracking and creeping corrosion.Suitable for insulation protection of indoor and outdoor power cable terminations or joints.
Features
Operating temperature: -55 to 105°C
Minimum fully recovery temperature: 125°C
Voltage class: 6kV ~ 36kV
Halogen-free, RoHS compliant, Flame-retardant
Single or Dual wall optional
Shrink ratio: 2:1 & 3:1
Standard Color: Red, Other colors optional
Dimension
| Part No. C101 |
As supplied(mm) Inner diameter D(min.) |
After recovered(mm) |
Standard length (m/pc or m/roll) |
||
| Inner diameter d(max.) |
Wall thickness t(nom.) |
||||
| 19-6 | 19 | 6 | 2.5 | 1.22/15 | |
| 30-10 | 30 | 10 | 3.0 | 1.22/15 | |
| 38-12 | 38 | 12 | 3.0 | 1.22/15 | |
| 40/16 | 40 | 16 | 3.0 | 1.22/15 | |
| 45/18 | 45 | 18 | 3.0 | 1.22/15 | |
| 55/21 | 55 | 21 | 3.0 | 1.22/15 | |
| 65/28 | 65 | 28 | 3.0 | 1.22/15 | |
| 75/36 | 75 | 36 | 3.0 | 1.22 | |
| 85/40 | 85 | 40 | 3.2 | 1.22 | |
| 100/40 | 100 | 40 | 3.6 | 1.22 | |
| 130/50 | 130 | 50 | 3.7 | 1.22 | |
Technical Data
| Property | Test Method | Requirement | |||
| Tensile Strength | ASTM D2671 | ≥8MPa | |||
| Ultimate Elongation | ASTM D2671 | ≥200% | |||
| Secant modulus 2% | ASTM D2671 | ≤170 MPa | |||
| Heat Aging(150°℃/168h) | ASTM D2671 | ||||
| Tensile Strength | ≥8MPa | ||||
| Ultimate Elongation | ≥100% | ||||
| Water absorption(23℃/24h) | ASTM D2671 | ≤0.5% | |||
| Low-temperature flexibility(-40°℃/4h) | ASTM D2671 | No cracking | |||
| Heat shock(200°℃/4h) | ASTM D2671 | No cracking,dripping or flowing | |||
| Dielectric strength | ASTM D2671 | ≥15kV/mm | |||
| Volume resistivity | ASTM D2671 | ≥1×10²Ω.cm | |||
| Tracking and erosion resistance | ASTM D2303 |
After 1hrat 2.5kV,and 1hrat 2.75kV, and 1hr at 3.00kV,and 20mins at 3.25kV.No burn penetration,no sustained burning |
|||
| Flammability | ASTM2863 | Ol≥25 | |||
| Color fastness to light | IEC 60684-3 | No visible change | |||
