Sold out
IDS-HX Low Fire Hazard Heat Shrink Marker Sleeve
IDS-HX
$0.00
IDS-HX Low Fire Hazard Heat Shrink Marker Sleeve Introduction A thin wall,flexible,low smoke emissions,halogen-free,flame retardant polyolefin heat shrink marker sleeve.A thermal transfer printer or laser engraving machine can...
IDS-HX Low Fire Hazard Heat Shrink Marker Sleeve
Introduction
A thin wall,flexible,low smoke emissions,halogen-free,flame retardant polyolefin heat shrink marker sleeve.A thermal transfer printer or laser engraving machine can be used.Excellent print performance,easy identification.Two or three scores available to produce multiple markers per sleeve at a lower cost.
Features
Operating temperature: -55 to 105°C
Minimum full recovery temperature: 135°C
Shrink ratio: 2:1
Halogen-free, Low Toxic Fumes, Low Smoke, Low Flammability
Compliant Standard EN45545-2 2013 R22/R23
Standard Color: See the below for details
Dimension
| Part No. IDS-HX |
As supplied(mm) | After recovered(mm) | ||||||
| Inner diameter D(min.) |
Sleeve Flattened Width W (min |
Sleeve Progression (nom.) |
Inner diameter d(max.) |
Wall thickness |
||||
| IDS-HX-M-2X-2.4-* | 2.4 | 4.3 | 12.7 | 1.2 | 0.50±0.10 | |||
| IDS-HX-M-2X-3.2-* | 3.2 | 6.5 | 12.7 | 1.6 | 0.50±0.10 | |||
| IDS-HX-M-2X-4.8-* | 4.8 | 8.9 | 12.7 | 2.4 | 0.51±0.11 | |||
| IDS-HX-M-2X-6.4-* | 6.4 | 11.0 | 16.9 | 3.2 | 0.65±0.15 | |||
| IDS-HX-M-2X-9.5-* | 9.5 | 15.7 | 25.4 | 4.8 | 0.65±0.15 | |||
| IDS-HX-M-2X-12.7-* | 12.7 | 20.7 | 29.6 | 6.4 | 0.65±0.15 | |||
| IDS-HX-M-2X-19.0-* | 19.0 | 30.7 | 42.3 | 9.5 | 0.75±0.15 | |||
| IDS-HX-M-2X-25.4-* | 25.4 | 41.1 | 50.8 | 12.7 | 0.90±0.15 | |||
| IDS-HX-M-2X-38.1-* | 38.1 | 61.0 | 72.0 | 19.1 | 1.00±0.20 | |||
| IDS-HX-M-2X-50.8-* | 50.8 | 80.0 | 101.6 | 25.4 |
1.00±0.20 |
|||
Technical Data
| Property | Test Method | Requirement | ||||||
| Longitudinal change | ASTM D2671 | -10%to+5% | ||||||
| Tensile Strength | ASTM D2671 | ≥10.3MPa | ||||||
| Ultimate Elongation | ASTM D2671 | ≥200% | ||||||
| Heat Aging(136°℃/168h) | ASTM D2671 | |||||||
| Ultimate Elongation | ≥100% | |||||||
| Low-temperature flexibility(-55℃/4h) | ASTM D2671 | No cracking | ||||||
| Heat shock(200℃/4h) | ASTM D2671 | No cracking,dripping or flowing | ||||||
| Water absorption(23℃/24h) | ASTM D2671 | ≤1.0% | ||||||
| Dielectric voltage Withstand | ASTM D2671 | 2500V,60s No breakdown | ||||||
| Dielectric strength | ASTM D2671 | ≥19.7kV/mm | ||||||
| Volume resistivity | ASTM D2671 | ≥1.0×10¹⁴Ω·cm | ||||||
| Flammability | ASTM D2671 Method C≤60 seconds burning duration | |||||||
| Copper effect(136℃/16h) | ASTM D2671 | No corrosion | ||||||
| Print perfomance | SAE AS5942 | Pass(legible after 50 rubs) | ||||||
| MIL-STD-202 | Pass (legible after 30 strokes) | |||||||
| Fluid resistance(23°C/24h) | SAE AS5942 | Mark is legible | ||||||
