Sold out
A1-CAP Wire Termination Heat Shrink Cap
A1-CAP
$0.00
A1-CAP Wire Termination Heat Shrink Cap Introduction Heat shrink end cap with hot melt adhesive liner, specially designed to provide insulation, sealing and protection for splices in electrical...
A1-CAP Wire Termination Heat Shrink Cap
Introduction
Heat shrink end cap with hot melt adhesive liner, specially designed to provide insulation, sealing and protection for splices in electrical wiring harnesses.
Features
Operating temperature: -40°C to 125°C
Minimum full recovery temperature: 135°C
Environmentally friendly, RoHS & ELV compliant
Shrink ratio: 4:1
Standard Color: Black
Dimensions
| Part No. A1-CAP |
Assupplied(mm) | After recovered(mm) | |||||
| Length L(±2) |
Inner diameter D(min.) |
Inner diameter d(max.) |
Wall thickness t(nom.) |
Adhesive Wallticknesst1(nom.) | |||
| A1-CAP-1 | 30~50 | 5.72 | 1.27 | 1.30 | 0.70 | ||
| A1-CAP-2 | 30~65 | 7.44 | 1.65 | 1.70 | 0.90 | ||
| A1-CAP-3 | 30~65 | 10.85 | 2.41 | 2.40 | 1.40 | ||
| A1-CAP-4 | 30~65 | 12.7 | 3.0 | 2.60 | 1.50 | ||
| A1-CAP-3.2 | 30~50 | 3.2 | 1.0 | 1.00 | 0.50 | ||
Technical Data
| Property | Test method | Requirement | |||||
| Longitudinal change | ASTM D2671 | ≥-10% | |||||
| Tensile strength | ASTM D2671 | ≥10.4 MPa | |||||
| Utimate elongation | ASTM D2671 | ≥300% | |||||
| Heat Aging(158℃/168h) | ASTM D2671 | ||||||
| Tensile Strength | ≥7.3MPa | ||||||
| Ultimate Elongation | ≥200% | ||||||
| Water absorption(23℃/24h) | ASTM D570 | ≤0.5% | |||||
| Low-temperatureflexibility (-40°℃/4h) | ASTM D2671 | No cracking | |||||
| Heat shock(225℃/4h) | ASTM D2671 | No cracking,drippingorflowing of outerjacket | |||||
| Dielectric strength | ASTM D2671 | ≥16kV/mm | |||||
| Volume resistivity | ASTM D2671 | ≥1.0×10¹²Ω.cm | |||||
| Dielectric voltage Withstand | AC 2500V,60S | No breakdown | |||||
| Flammability | ISO 6722-1 | Self-extinguishing within 60S | |||||
| Copper corrosion(158°℃/168h) | ASTM D2671 | No corrosion | |||||
