Ausverkauft
T1S Compound Insulation Heat Shrink Spiral Tape Adhesive lined
$0.00
Introduction Cross-linked polyolefin outer layer,pre-coated adhesive inner layer.Emergency repair of the bare conductor of the electrical system. Features Operating temperature: -40 to 70°C Dimension: 1.0±0.1mm thickness, 50±3mm width,...
Introduction
Cross-linked polyolefin outer layer,pre-coated adhesive inner layer.Emergency repair of the bare conductor of the electrical system.
Features
Operating temperature: -40 to 70°C
Dimension: 1.0±0.1mm thickness, 50±3mm width, 500+20mm length
Standard Color: Red
Voltage class: 1kV ~ 36kV
Outstanding electrical insulation and high mechanical strength
Fast installation — just wrap and heat to shrink for easy handling.
UV resistance, outdoor aging resistance and mildew resistance
Dimension
| Part NO. | Width (mm) | Thickness (mm) | Length (m) |
| T1S | 50±3mm | 1.0±0.1mm | 0.5 |
How to use:
Firmly attach the tape end to the cable. Wind the tape spirally with overlaps following its inherent forming property with tight tension. Secure wrap tail against loosening. Rotate and apply uniform flame starting at the end for shrinkage and fixation, until slight extrusion of inner mastic appears.
Technical Data
| Property | Test Method | Requirement | |||
| Tensile Strength | GB/T 528-2009 | ≥12 MPa | |||
| Ultimate Elongation | GB/T 528-2009 | ≥200% | |||
| Dielectric strength | GB/T 1695-2005 | ≥25 kV/mm | |||
| Volume resistivity | GB/T 1692-2008 | ≥1.0×10¹³Ω.cm | |||