S2N Halogen-free Thin Wall Heat Shrink Tube for General Purpose
$0.00
IntroductionA thin wall, flexible, low-smoke emissions, halogen-free, flame-retardant polyolefin heat shrinkable tube.Suitable for insulation protection, parts identification, mechanical protection, bundling of wires, wire harnesses, and electronic components. FeaturesOperating temperature: -40 to 125°CMinimum full recovery temperature: 125°CShrink ratio: 2:1 & 3:1Halogen-free...
Add to Compare
S2N-1
Heat Shrink Material Thin Wall Heat Shrink Tubing
IntroductionA thin wall, flexible, low-smoke emissions, halogen-free, flame-retardant polyolefin heat shrinkable tube.Suitable for insulation protection, parts identification, mechanical protection, bundling of wires,...

You renderd the snippet swatch.liquid with the name of a product option — '收缩率' — that does not belong to your product.

Use {% render 'swatch' with 'name of your product option here' %}

Example: {% render 'swatch' with 'Color' %}

This is case-sensitive! Do not put in 'color' if your product option name is 'Color'.

S1-1 Polyolefin Heat-shrinkable Tube for High-voltage Copper Busbars of Electric Vehicles
$0.00
Introduction Polyolefin heat shrinkable tube for high-voltage copper busbars of electric vehicles,with a rated voltage of DC60V-1000V or AC25V-660V. Excellent high temperature resistance, elastic recovery, anti-cracking and no visible air bubble trapped after shrinkage. Features Operating temperature: -55 to 125°C...
Add to Compare
S1-1
Heat Shrink for Automotive Parts Heat Shrink Material
Introduction Polyolefin heat shrinkable tube for high-voltage copper busbars of electric vehicles,with a rated voltage of DC60V-1000V or AC25V-660V. Excellent high temperature...

You renderd the snippet swatch.liquid with the name of a product option — 'Title' — that does not belong to your product.

Use {% render 'swatch' with 'name of your product option here' %}

Example: {% render 'swatch' with 'Color' %}

This is case-sensitive! Do not put in 'color' if your product option name is 'Color'.

R1 Wraparound Heat Shrink Cable Repair Sleeve
$0.00
Introduction Cross-linked semirigid polyolefin outer layer provides abrasion and corrosion resistance.Pre-coated adhesive inner layer provides waterproof sealing protection.Rail and channel closure design,suitable for quick repair of damaged power cable in irregular shapes and sizes. Features Operating temperature: -25 to 90°C...
Add to Compare
R1
Heat Shrink Material Medium/Heavy Wall Heat Shrink Tube
Introduction Cross-linked semirigid polyolefin outer layer provides abrasion and corrosion resistance.Pre-coated adhesive inner layer provides waterproof sealing protection.Rail and channel closure design,suitable...

You renderd the snippet swatch.liquid with the name of a product option — 'Title' — that does not belong to your product.

Use {% render 'swatch' with 'name of your product option here' %}

Example: {% render 'swatch' with 'Color' %}

This is case-sensitive! Do not put in 'color' if your product option name is 'Color'.

JTSP Heat Shrinkable Fiber Optic Splice Protector
$0.00
Introduction Fiber optic splice protector,including meltable adhesive tube,polyolefin heat shrink tube and stainless steel rod(ceramic rod or fiberglass rod available).Suitable for the joint protection of optical fibers, improves mechanical strength, and maintains optical fiber transmission performance.Clear sleeve for easy inspection...
Add to Compare
JTSP
Heat Shrink Material Telecommunication Heat Shrink
Introduction Fiber optic splice protector,including meltable adhesive tube,polyolefin heat shrink tube and stainless steel rod(ceramic rod or fiberglass rod available).Suitable for the...

You renderd the snippet swatch.liquid with the name of a product option — 'Title' — that does not belong to your product.

Use {% render 'swatch' with 'name of your product option here' %}

Example: {% render 'swatch' with 'Color' %}

This is case-sensitive! Do not put in 'color' if your product option name is 'Color'.

IDS-HF125 Halogen Free Polyolefin Heat Shrink Marker Sleeve
$0.00
Introduction A thin wall,flexible,low smoke emissions,halogen-free,flame retardant polyolefin heat shrink marker sleeve.A thermal transfer printer or laser printer can be used.Excellent print performance,easy identification.Two or three scores available to produce multiple markers per sleeve at a lower cost. Features Operating...
Add to Compare
IDS-HF125
Heat Shrink Material Identification Heat Shrink Marker Sleeve
Introduction A thin wall,flexible,low smoke emissions,halogen-free,flame retardant polyolefin heat shrink marker sleeve.A thermal transfer printer or laser printer can be used.Excellent print...

You renderd the snippet swatch.liquid with the name of a product option — 'Title' — that does not belong to your product.

Use {% render 'swatch' with 'name of your product option here' %}

Example: {% render 'swatch' with 'Color' %}

This is case-sensitive! Do not put in 'color' if your product option name is 'Color'.

C15-35 26/35(40.5)kV Heat Shrink Cable Accessories
$0.00
Introduction Single core, three cores heat shrik cable accessories. Suitable for protection of indoor and outdoor electric power cable joint and termination under 26/35 kV. Features Voltage class: 26kV/35kV Operating temperature: -55 to 105°C Supplied by set, with the materials...
Add to Compare
C15-35
Heat Shrink Material Power Cable Accessories
Introduction Single core, three cores heat shrik cable accessories. Suitable for protection of indoor and outdoor electric power cable joint and termination...

You renderd the snippet swatch.liquid with the name of a product option — 'Title' — that does not belong to your product.

Use {% render 'swatch' with 'name of your product option here' %}

Example: {% render 'swatch' with 'Color' %}

This is case-sensitive! Do not put in 'color' if your product option name is 'Color'.

C106 Semi-Conductive/Insulation/Elastomeric Insulation Tri-Layer Heat Shrink Tube
$0.00
Introduction Co-extrusion design,semi-conductive/insulation/elastomeric insulation tri-layer heat shrink tube.The elastomeric layer is designed to have a fast shrinkage rate to avoid overheating damage.Suitable for insulation protection of power cable joint under 36kV. Features Operating temperature: -55 to 105°C Minimum fully recovery...
Add to Compare
C106
Heat Shrink Material Power Cable Accessories
Introduction Co-extrusion design,semi-conductive/insulation/elastomeric insulation tri-layer heat shrink tube.The elastomeric layer is designed to have a fast shrinkage rate to avoid overheating damage.Suitable...

You renderd the snippet swatch.liquid with the name of a product option — 'Title' — that does not belong to your product.

Use {% render 'swatch' with 'name of your product option here' %}

Example: {% render 'swatch' with 'Color' %}

This is case-sensitive! Do not put in 'color' if your product option name is 'Color'.

A1-RC Clear Wire Splice Dual Wall Heat Shrink Tube
$0.00
Introduction Polyolefin dual wall heat shrinkable tube, transparent, halogen-free, high shrinkage rate.Suitable for waterproof sealing and insulation protection of automotive wiring harness wire connectors, terminals and components.Length can be customized. Features Operating temperature: -40°C to 125°C Minimum full recovery temperature:...
Add to Compare
A1-RC
Heat Shrink for Automotive Parts Heat Shrink Material
Introduction Polyolefin dual wall heat shrinkable tube, transparent, halogen-free, high shrinkage rate.Suitable for waterproof sealing and insulation protection of automotive wiring harness...

You renderd the snippet swatch.liquid with the name of a product option — 'Title' — that does not belong to your product.

Use {% render 'swatch' with 'name of your product option here' %}

Example: {% render 'swatch' with 'Color' %}

This is case-sensitive! Do not put in 'color' if your product option name is 'Color'.

A1-CAP Wire Termination Heat Shrink Cap
$0.00
Introduction Heat shrink end cap with hot melt adhesive liner, specially designed to provide insulation, sealing and protection for splices in electrical wiring harnesses. Features Operating temperature: -40°C to 125°C Minimum full recovery temperature: 135°C Environmentally friendly, RoHS & ELV...
Add to Compare
A1-CAP
Heat Shrink for Automotive Parts Heat Shrink Material
Introduction Heat shrink end cap with hot melt adhesive liner, specially designed to provide insulation, sealing and protection for splices in electrical...

You renderd the snippet swatch.liquid with the name of a product option — 'Title' — that does not belong to your product.

Use {% render 'swatch' with 'name of your product option here' %}

Example: {% render 'swatch' with 'Color' %}

This is case-sensitive! Do not put in 'color' if your product option name is 'Color'.

A1-C Clear Wire Splice Dual Wall Heat Shrink Tube
$0.00
Introduction Polyolefin dual wall heat-shrinkable tube, transparent, halogen-free, high shrinkage rate.Suitable for waterproof sealing and insulation protection of automotive wiring harness wire connectors, terminals and components.Length can be customized. Features Operating temperature: -40°C to 130°C Minimum full recovery temperature: 135°C...
Add to Compare
A1-C
Heat Shrink for Automotive Parts Heat Shrink Material
Introduction Polyolefin dual wall heat-shrinkable tube, transparent, halogen-free, high shrinkage rate.Suitable for waterproof sealing and insulation protection of automotive wiring harness wire...

You renderd the snippet swatch.liquid with the name of a product option — 'Title' — that does not belong to your product.

Use {% render 'swatch' with 'name of your product option here' %}

Example: {% render 'swatch' with 'Color' %}

This is case-sensitive! Do not put in 'color' if your product option name is 'Color'.

You have successfully subscribed!