Sold out
IDS-HF125 Halogen Free Polyolefin Heat Shrink Marker Sleeve
IDS-HF125
$0.00
IDS-HF125 Halogen Free Polyolefin Heat Shrink Marker Sleeve Introduction A thin wall,flexible,low smoke emissions,halogen-free,flame retardant polyolefin heat shrink marker sleeve.A thermal transfer printer or laser printer can be...
IDS-HF125 Halogen Free Polyolefin Heat Shrink Marker Sleeve
Introduction
A thin wall,flexible,low smoke emissions,halogen-free,flame retardant polyolefin heat shrink marker sleeve.A thermal transfer printer or laser printer can be used.Excellent print performance,easy identification.Two or three scores available to produce multiple markers per sleeve at a lower cost.
Features
Operating temperature: -55 to 125°C
Minimum full recovery temperature: 135°C
Shrink ratio: 2:1
Halogen-free, RoHS compliant
Compliant Standard EN45545-2 2013 R22/R23
Standard Color: See the below for details
Dimension
| Part No. IDS-HF125 |
As supplied(mm) | After recovered(mm) | ||||
| Inner diameter D(min.) |
Sleeve Flattened Width W(min. |
Sleeve Progression (nom.) |
Inner diameter d(max.) |
Wall thickness t(nom. |
||
| IDS-HF125-M-2X-1.6-* | 1.6 | 3.2 | 10.3 | 0.8 | 0.45 | |
| IDS-HF125-M-2X-2.4-* | 2.4 | 4.3 | 12.7 | 1.2 | 0.50 | |
| IDS-HF125-M-2X-3.2-* | 3.2 | 5.8 | 12.7 | 1.6 | 0.50 | |
| IDS-HF125-M-2X-4.8-* | 4.8 | 8.0 | 12.7 | 2.4 | 0.55 | |
| IDS-HF125-M-2X-6.4-* | 6.4 | 10.7 | 16.9 | 3.2 | 0.55 | |
| IDS-HF125-M-2X-9.5-* | 9.5 | 15.5 | 25.4 | 4.8 | 0.60 | |
| IDS-HF125-M-2X-12.7-* | 12.7 | 20.4 | 29.6 | 6.4 | 0.60 | |
| IDS-HF125-M-2X-19.1-* | 19.1 | 30.5 | 42.3 | 9.5 | 0.70 | |
| IDS-HF125-M-2X-25.4-* | 25.4 | 40.4 | 50.8 | 12.7 | 0.70 | |
| IDS-HF125-M-2X-38.1-* | 38.1 | 60.3 | 72.0 | 19.1 | 0.70 | |
| IDS-HF125-M-2X-50.8-* | 50.8 | 80.0 | 101.6 | 25.4 | 0.73 | |
| IDS-HF125-M-2X-76.2-* | 76.2 | 114.3 | 137.2 | 38.1 | 0.73 | |
Technical Data
| Property | Test Method | Requirement | ||||
| Longitudinal change | ASTM D2671 | -10%to+5% | ||||
| Tensile Strength | ASTM D2671 | ≥10.3MPa | ||||
| Ultimate Elongation | ASTM D2671 | ≥200% | ||||
| Heat Aging(136℃/168h) | ASTM D2671 | |||||
| Ultimate Elongation | ≥100% | |||||
| Low-temperature flexibility(-55℃/4h) | ASTM D2671 | No cracking | ||||
| Heat shock (200℃/4h) | ASTM D2671 | No cracking,dripping or flowing | ||||
| Water absorption(23℃/24h) | ASTM D2671 | ≤1.0% | ||||
| Dielectric voltage Withstand | ASTM D2671 | 2500V,60s No breakdown | ||||
| Dielectric strength | ASTM D2671 | ≥19.7kV/mm | ||||
| Volume resistivity | ASTM D2671 | ≥1.0×10¹⁴Ω·cm | ||||
| Flammability | ASTM D2671 Metho | d C ≤60 seconds burning duration | ||||
| Copper effect(136℃/16h) | ASTM D2671 | No corrosion | ||||
| Print perfomance | SAE AS5942 | Pass(legible after 50 rubs) | ||||
| MIL-STD-202 | Pass (legible after 30 strokes) | |||||
| Fluid resistance(23C/24h) | SAE AS5942 | Mark is legible | ||||
